Hunting knife made of Elmax powder steel with a handle made of stabilized maple. This is a reduced version of the popular W2 type with a total length of 186 mm. Pancake sheath made of cowhide.
The W2S hunting knife was created as a smaller version of the popular W2 type. It is made of top-quality Elmax powder steel. The blade was heat-treated cryogenically using liquid nitrogen. This method eliminates residual austenite, which further increases the resulting hardness while maintaining the toughness of the steel. The hardness achieved in this case is 61.9 HRC.
The handle is made of stabilized maple using three different pigments. This means that the stabilization process was applied three times in a row.
This is a practical knife with a high grind and excellent cutting properties. It fits well in the hand and is suitable for all common tasks, especially for pulling.
The blade has a satin finish. The pins are made of brass.
The knife has a “pancake” sheath made of cowhide. In this case, a relatively small angle of inclination was chosen so that the knife could be worn both on the side and on the back.
| Facet angle | 24° |
|---|---|
| Hardness | 61.9 HRC |
| Grind | Flat with facet |
| Bolts/Pins | Brass |
| Blade material | Stainless PM steel Elmax |
| Surface finish | Satin |
| Weight | 143 g |
| Handle | Stabilised maple wood |
| Construction | Full tang |
| Blade thickness | 3,8 mm |
| Blade height | 33 mm |
| Total length | 186 mm |
| Blade length | 81 mm |
By subscribing you admit this privacy policy.
Yes, I need holiday. I will be back again on August 9th. Please be patient.
