Larger EDC knife made of RWL-34 powder steel with a handle made of stabilized birch. Total length 200 mm. Cowhide sheath with belt clip and carabiner attachment for wearing on the belt.
The large EDC knife Cone (everyday carry knife) is made of RWL-34 powder steel. The blade was heat-treated cryogenically using liquid nitrogen. This method eliminates residual austenite, which further increases the resulting hardness while maintaining the toughness of the steel. The hardness achieved in this case is 62.2 HRC.
The handle is made of stabilized Karelian birch with black-red pigmentation. There is a decorative strip of red G10 composite between the handles and the blade.
There are 2 stainless steel pins and a lanyard hole in the handle.
The blade has a high grind and therefore excellent cutting properties. The handles are thin, so the knife is relatively light despite its size.
The blade has a satin finish,
The knife has a cowhide quiver sheath with a belt or pocket clip and a carabiner ring for wearing on the belt. The knife includes a fire steel attached to the sheath with two straps.
| Facet angle | 24° |
|---|---|
| Hardness | 62.2 HRC |
| Grind | Flat with facet |
| Bolts/Pins | Stainless steel |
| Blade material | Powder steel RWL-34 |
| Surface finish | Satin |
| Weight | 150 g |
| Handle | G10, Stabilized Karelian birch |
| Construction | Full tang |
| Blade thickness | 3.7 mm |
| Blade height | 31 mm |
| Total length | 200 mm |
| Blade length | 93mm |
By subscribing you admit this privacy policy.
Yes, I need holiday. I will be back again on August 9th. Please be patient.
