A collector’s knife made of D2 steel decorated with engraving on both sides of the blade, with a mammoth tusk handle and a decorated leather sheath. The total length of the knife is 244 mm.
The Rafal collector’s knife is designed as a hunting knife, and due to its design and exclusive materials, it will also attract collectors. It is made of tool steel with increased corrosion resistance D2. The blade was heat-treated cryogenically, the hardness of the steel is 60.4 HRC.
The knife is a full tang construction, the handle scales are made of stabilised mammoth tusk and are glued with black G10 liner. The pins are carbon. The bolsters are made of bronze, surface-treated with the stippling technique. They are attached to the blade with bronze rivets.
The blade is decorated on both sides with a fine engraving with an arabesque motif. A false edge is ground along the entire length of the blade’s spine. The arched transition between the handle and the blade forms a thumb rest.
The total length of the knife is 244 mm, the blade is 123 mm long and 42 mm high, the blade thickness is 3.8 mm, the knife weight is 233 g.
The knife comes with a leather sheath richly decorated with embossing. The sheath has a removable belt loop with a snap fastener. After removing the loop, the sheath can be used to store the knife or carry it in luggage.
| Author | David Brož |
|---|---|
| Blade material | Werkzeugstahl D2 |
| Hardness | 60.4 HRC |
| Grind | Flat with facet |
| Facet angle | 20° |
| Construction | Full tang |
| Handle | Mammoth tusk |
| Bolts/Pins | Carbon |
| Total length | 244 mm |
| Blade length | 123 mm |
| Blade thickness | 3.8 mm |
| Blade height | 42 mm |
| Weight | 233 g |
| Surface finish | Satin, Engraving |
| Guard/Bolster | Bronze |
By subscribing you admit this privacy policy.
Yes, I need holiday. I will be back again on August 9th. Please be patient.
